Industry
DIN 1498 Tension bushes
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 20
D2 (mm): 24
B (mm): 10
Intake port tolerance: +0,033
Inner Ø tolerance after fitting min.: +0,065
Inner Ø tolerance after fitting max.: +0,149
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 20
D2 (mm): 24
B (mm): 10
Intake port tolerance: +0,033
Inner Ø tolerance after fitting min.: +0,065
Inner Ø tolerance after fitting max.: +0,149
18.26 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 20
D2 (mm): 24
B (mm): 20
Intake port tolerance: +0,033
Inner Ø tolerance after fitting min.: +0,065
Inner Ø tolerance after fitting max.: +0,149
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 20
D2 (mm): 24
B (mm): 20
Intake port tolerance: +0,033
Inner Ø tolerance after fitting min.: +0,065
Inner Ø tolerance after fitting max.: +0,149
16.95 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 25
D2 (mm): 28
B (mm): 16
Intake port tolerance: +0,033
Inner Ø tolerance after fitting min.: +0,065
Inner Ø tolerance after fitting max.: +0,149
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 25
D2 (mm): 28
B (mm): 16
Intake port tolerance: +0,033
Inner Ø tolerance after fitting min.: +0,065
Inner Ø tolerance after fitting max.: +0,149
23.34 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 25
D2 (mm): 34
B (mm): 27
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,065
Inner Ø tolerance after fitting max.: +0,149
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 25
D2 (mm): 34
B (mm): 27
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,065
Inner Ø tolerance after fitting max.: +0,149
24.71 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 25
D2 (mm): 34
B (mm): 80
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,065
Inner Ø tolerance after fitting max.: +0,195
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 25
D2 (mm): 34
B (mm): 80
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,065
Inner Ø tolerance after fitting max.: +0,195
41.76 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 28
D2 (mm): 35
B (mm): 40
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,065
Inner Ø tolerance after fitting max.: +0,149
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 28
D2 (mm): 35
B (mm): 40
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,065
Inner Ø tolerance after fitting max.: +0,149
25.49 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 30
D2 (mm): 38
B (mm): 30
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 30
D2 (mm): 38
B (mm): 30
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
14.29 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 30
D2 (mm): 38
B (mm): 35
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 30
D2 (mm): 38
B (mm): 35
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
22.72 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 30
D2 (mm): 38
B (mm): 40
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 30
D2 (mm): 38
B (mm): 40
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
22.90 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 30
D2 (mm): 38
B (mm): 50
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,240
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 30
D2 (mm): 38
B (mm): 50
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,240
23.60 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 30
D2 (mm): 38
B (mm): 55
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,240
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 30
D2 (mm): 38
B (mm): 55
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,240
38.49 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 30
D2 (mm): 40
B (mm): 20
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 30
D2 (mm): 40
B (mm): 20
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
27.47 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 32
D2 (mm): 40
B (mm): 20
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 32
D2 (mm): 40
B (mm): 20
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
26.17 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 32
D2 (mm): 40
B (mm): 30
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 32
D2 (mm): 40
B (mm): 30
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
29.27 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 32
D2 (mm): 40
B (mm): 40
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 32
D2 (mm): 40
B (mm): 40
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
29.27 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 32
D2 (mm): 40
B (mm): 50
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,240
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 32
D2 (mm): 40
B (mm): 50
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,240
30.48 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 35
D2 (mm): 43
B (mm): 40
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 35
D2 (mm): 43
B (mm): 40
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
25.14 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 35
D2 (mm): 43
B (mm): 50
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,240
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 35
D2 (mm): 43
B (mm): 50
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,240
25.58 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 35
D2 (mm): 45
B (mm): 30
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 35
D2 (mm): 45
B (mm): 30
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
27.99 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 35
D2 (mm): 45
B (mm): 40
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: 0,180
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 35
D2 (mm): 45
B (mm): 40
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: 0,180
29.19 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 35
D2 (mm): 45
B (mm): 50
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: 0,240
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 35
D2 (mm): 45
B (mm): 50
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: 0,240
34.96 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 40
D2 (mm): 50
B (mm): 30
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: 0,180
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 40
D2 (mm): 50
B (mm): 30
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: 0,180
27.13 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 40
D2 (mm): 50
B (mm): 35
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: 0,180
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 40
D2 (mm): 50
B (mm): 35
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: 0,180
27.38 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 40
D2 (mm): 50
B (mm): 40
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: 0,180
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 40
D2 (mm): 50
B (mm): 40
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: 0,180
26.76 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 40
D2 (mm): 50
B (mm): 50
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,240
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 40
D2 (mm): 50
B (mm): 50
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,240
35.30 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 45
D2 (mm): 55
B (mm): 30
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 45
D2 (mm): 55
B (mm): 30
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
29.80 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 45
D2 (mm): 55
B (mm): 40
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 45
D2 (mm): 55
B (mm): 40
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
27.38 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 50
D2 (mm): 60
B (mm): 30
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,100
Inner Ø tolerance after fitting max.: +0,290
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 50
D2 (mm): 60
B (mm): 30
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,100
Inner Ø tolerance after fitting max.: +0,290
32.54 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 50
D2 (mm): 60
B (mm): 50
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,100
Inner Ø tolerance after fitting max.: +0,400
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 50
D2 (mm): 60
B (mm): 50
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,100
Inner Ø tolerance after fitting max.: +0,400
41.92 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 55
D2 (mm): 65
B (mm): 40
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,100
Inner Ø tolerance after fitting max.: +0,290
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 55
D2 (mm): 65
B (mm): 40
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,100
Inner Ø tolerance after fitting max.: +0,290
65.70 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 55
D2 (mm): 65
B (mm): 70
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,100
Inner Ø tolerance after fitting max.: +0,400
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 55
D2 (mm): 65
B (mm): 70
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,100
Inner Ø tolerance after fitting max.: +0,400
77.56 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 60
D2 (mm): 70
B (mm): 60
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,100
Inner Ø tolerance after fitting max.: +0,400
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 60
D2 (mm): 70
B (mm): 60
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,100
Inner Ø tolerance after fitting max.: +0,400
42.45 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 60
D2 (mm): 72
B (mm): 60
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,100
Inner Ø tolerance after fitting max.: +0,400
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 60
D2 (mm): 72
B (mm): 60
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,100
Inner Ø tolerance after fitting max.: +0,400
54.68 €
* For EU all prices including VAT, plus shipping.
