Industry
DIN 1498 Tension bushes
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 20
D2 (mm): 24
B (mm): 10
Intake port tolerance: +0,033
Inner Ø tolerance after fitting min.: +0,065
Inner Ø tolerance after fitting max.: +0,149
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 20
D2 (mm): 24
B (mm): 10
Intake port tolerance: +0,033
Inner Ø tolerance after fitting min.: +0,065
Inner Ø tolerance after fitting max.: +0,149
19.20 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 20
D2 (mm): 24
B (mm): 20
Intake port tolerance: +0,033
Inner Ø tolerance after fitting min.: +0,065
Inner Ø tolerance after fitting max.: +0,149
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 20
D2 (mm): 24
B (mm): 20
Intake port tolerance: +0,033
Inner Ø tolerance after fitting min.: +0,065
Inner Ø tolerance after fitting max.: +0,149
17.91 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 25
D2 (mm): 28
B (mm): 16
Intake port tolerance: +0,033
Inner Ø tolerance after fitting min.: +0,065
Inner Ø tolerance after fitting max.: +0,149
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 25
D2 (mm): 28
B (mm): 16
Intake port tolerance: +0,033
Inner Ø tolerance after fitting min.: +0,065
Inner Ø tolerance after fitting max.: +0,149
24.54 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 25
D2 (mm): 32
B (mm): 30
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,065
Inner Ø tolerance after fitting max.: +0,149
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 25
D2 (mm): 32
B (mm): 30
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,065
Inner Ø tolerance after fitting max.: +0,149
26.00 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 25
D2 (mm): 34
B (mm): 27
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,065
Inner Ø tolerance after fitting max.: +0,149
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 25
D2 (mm): 34
B (mm): 27
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,065
Inner Ø tolerance after fitting max.: +0,149
26.00 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 25
D2 (mm): 34
B (mm): 80
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,065
Inner Ø tolerance after fitting max.: +0,195
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 25
D2 (mm): 34
B (mm): 80
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,065
Inner Ø tolerance after fitting max.: +0,195
44.00 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 28
D2 (mm): 35
B (mm): 40
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,065
Inner Ø tolerance after fitting max.: +0,149
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 28
D2 (mm): 35
B (mm): 40
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,065
Inner Ø tolerance after fitting max.: +0,149
26.86 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 30
D2 (mm): 38
B (mm): 30
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 30
D2 (mm): 38
B (mm): 30
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
18.43 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 30
D2 (mm): 38
B (mm): 35
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 30
D2 (mm): 38
B (mm): 35
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
23.94 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 30
D2 (mm): 38
B (mm): 40
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 30
D2 (mm): 38
B (mm): 40
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
22.82 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 30
D2 (mm): 38
B (mm): 50
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,240
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 30
D2 (mm): 38
B (mm): 50
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,240
24.80 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 30
D2 (mm): 38
B (mm): 55
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,240
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 30
D2 (mm): 38
B (mm): 55
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,240
40.48 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 30
D2 (mm): 40
B (mm): 20
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 30
D2 (mm): 40
B (mm): 20
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
28.85 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 32
D2 (mm): 40
B (mm): 20
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 32
D2 (mm): 40
B (mm): 20
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
27.55 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 32
D2 (mm): 40
B (mm): 30
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 32
D2 (mm): 40
B (mm): 30
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
30.82 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 32
D2 (mm): 40
B (mm): 40
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 32
D2 (mm): 40
B (mm): 40
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
30.82 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 32
D2 (mm): 40
B (mm): 50
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,240
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 32
D2 (mm): 40
B (mm): 50
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,240
32.03 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 35
D2 (mm): 43
B (mm): 40
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 35
D2 (mm): 43
B (mm): 40
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
26.44 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 35
D2 (mm): 43
B (mm): 50
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,240
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 35
D2 (mm): 43
B (mm): 50
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,240
26.95 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 35
D2 (mm): 45
B (mm): 30
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 35
D2 (mm): 45
B (mm): 30
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
29.45 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 35
D2 (mm): 45
B (mm): 40
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: 0,180
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 35
D2 (mm): 45
B (mm): 40
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: 0,180
30.74 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 35
D2 (mm): 45
B (mm): 50
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: 0,240
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 35
D2 (mm): 45
B (mm): 50
Intake port tolerance: +0,039
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: 0,240
36.85 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 40
D2 (mm): 50
B (mm): 30
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: 0,180
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 40
D2 (mm): 50
B (mm): 30
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: 0,180
28.59 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 40
D2 (mm): 50
B (mm): 35
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: 0,180
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 40
D2 (mm): 50
B (mm): 35
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: 0,180
28.85 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 40
D2 (mm): 50
B (mm): 40
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: 0,180
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 40
D2 (mm): 50
B (mm): 40
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: 0,180
28.16 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 40
D2 (mm): 50
B (mm): 50
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,240
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 40
D2 (mm): 50
B (mm): 50
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,240
37.20 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 45
D2 (mm): 55
B (mm): 30
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 45
D2 (mm): 55
B (mm): 30
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
31.43 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 45
D2 (mm): 55
B (mm): 40
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 45
D2 (mm): 55
B (mm): 40
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,080
Inner Ø tolerance after fitting max.: +0,180
28.85 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 50
D2 (mm): 60
B (mm): 30
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,100
Inner Ø tolerance after fitting max.: +0,290
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 50
D2 (mm): 60
B (mm): 30
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,100
Inner Ø tolerance after fitting max.: +0,290
34.36 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 50
D2 (mm): 60
B (mm): 50
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,100
Inner Ø tolerance after fitting max.: +0,400
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 50
D2 (mm): 60
B (mm): 50
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,100
Inner Ø tolerance after fitting max.: +0,400
44.17 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 55
D2 (mm): 65
B (mm): 40
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,100
Inner Ø tolerance after fitting max.: +0,290
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 55
D2 (mm): 65
B (mm): 40
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,100
Inner Ø tolerance after fitting max.: +0,290
69.14 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 55
D2 (mm): 65
B (mm): 70
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,100
Inner Ø tolerance after fitting max.: +0,400
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 55
D2 (mm): 65
B (mm): 70
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,100
Inner Ø tolerance after fitting max.: +0,400
81.71 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 60
D2 (mm): 70
B (mm): 60
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,100
Inner Ø tolerance after fitting max.: +0,400
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 60
D2 (mm): 70
B (mm): 60
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,100
Inner Ø tolerance after fitting max.: +0,400
44.69 €
Info: Tension bush
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 60
D2 (mm): 72
B (mm): 60
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,100
Inner Ø tolerance after fitting max.: +0,400
Info: Tension bushes made of spring steel, rolled, annealed, are the alternative bearing elements to solve bearing problems economically, even under harsh operating conditions, often without sufficient lubrication ability. They are particularly suitable for slowly rotating or oscillating bearing movements.
D1 (mm): 60
D2 (mm): 72
B (mm): 60
Intake port tolerance: +0,046
Inner Ø tolerance after fitting min.: +0,100
Inner Ø tolerance after fitting max.: +0,400
57.51 €
* For EU all prices including VAT, plus shipping.
