MTD ST 46 P 25A-201G678 (2001) Basic machine Spareparts

HANDLE-UPPER

Article Number:

749-1255

Pos:

DINNORM:

749-1255-0637

Modell Year:

ST 46 P / 2001

no longer available

MTD String trimmer ST 46 P 25A-201G678 (2001) Basic machine

Pos	Article Number	Description
1	747-0824	BRAKE BAIL
2	746-1116	CABLE-CLUTCH
3	681-0166	CONTROL LOCK BRACKET
4	710-0578	SCR:MACH:1/4-20:1.500:TRUSPHI
5	712-0324	NUT:HEXLK:1/4-20:GR8:NYLON
6	710-1205	BOLT:EYE:1/4-20: BENT ROPE GDE
7	720-0279	WING NUT
8	749-1255	HANDLE-UPPER
9	725-0157	CBL:TIE: 3/16 X .05 X 7.4
10	710-0450	SCR:CRG:5/16-18:3.00:GR1
11	749-1254	HANDLE LOWER
12	731-1268	INSL:HNDL:UPR
13	731-1267	LOWER HANDLE CONNECTOR
14	720-0241	WING NUT
15	736-0451	WASH:SDL:.320 x.93 x.060
17	710-0896	SCR:AB:1/4-14:.625:HXINDWSH
18	782-9065	TRAIL SHIELD CLIP
19	731-2329	REAR FLAP
20	710-0216	HHCS:3/8-16:.75:GR5:STD
21	710-0502A	SCR:TTSEMS:3/8-16:1.250:HXLWSH
22	681-0159	AXLE ASSY.
23	750-1240	BUSHING
24	736-0182	WASHER:SPR:.500 x 1.00 x.022
25	734-1860	WHEEL ASSEMBLY
25A	734-1864	REAR WHEEL ASSY.
26	736-0270	WASHER:BLVL:.265 x .750 x .060
27	710-3015	HHCS:1/4-20:.75:GR5:STD
28	710-1694	STUD:CLINCH:5/16-18x1.25
29	710-0237	HHCS:5/16-24:.625:GR5:STD
30	736-0425	WASH:BELL:.325 x .930 x .045
31	710-1307	SCREW
32	710-0703	SCR:CRG:1/4-20:.75:GR5
33	712-3005	NUT:FLGLK:3/8-16:GR5
34	681-0165	DECK ASM
35	781-1020	BRACKET-KEEPER
36	712-3004A	NUT:FLGLK:5/16-18:GR5:SD LK
37	681-0181	BRACKET ASSY- IDLER
38	754-0625A	BELT V-TYPE
39	781-1007	BRACKET BELT KEEPER
40	756-1198	PULLEY-IDLER-FLAT
41	732-1007	TORSION SPRING
42	781-1028	BRKT-TRANS BLT KPR
43	750-1277	BUSHING
44	750-1275	BUSHING
45	736-0371	WASH:THRST:.343 x .880 x .062
46	756-1192	PULLEY-FLYWHEEL
47	736-0452	WASH:BELL:.396 x 1.140 x.095
48	710-1044	HEX.SCREW 3/8-24:1.50:GR8:SPEC
49	631-0096	REAR DEFLECTOR:ASM:700
50	736-0173	WASH:FL:.28ID:.74OD:.063
51	618-0558	SPINDLE ASSY.
52	OEM-743-0111	LINE-TRIMMER 24-PACK
53	782-0143	SKID ASM-TRIMMER
54	710-3013	HHCS:1/4-20:.50:GR5:STD