MTD T 250 21A-252C678 (2005) Basic machine Spareparts

Name: SCR:TT:3/8-16:1.250:HXINDWSH:S
Price: 6.30 EUR

SCR:TT:3/8-16:1.250:HXINDWSH:S

Note: This article is 3 times installed in the device, the price is per piece!

Article Number:

710-1315

Pos:

Modell Year:

T 250 / 2005

Description:

"3/8-16x1.25"""

DINNORM:

FINISH:MTD SPEC-701-01002

6.30 €

for EU Including VAT, plus shipping

Article added to Cart!

in Stock

MTD Tillers T 250 21A-252C678 (2005) Basic machine

Pos	Article Number	Description
1	647-04047	BAIL-CLUTCH
2	649-04029	LOWER HANDLE
3	649-04030	Upper handle
4	710-0136	HHCS:1/4-20:1.75:GR5:STD
5	710-0189	HHCS:5/16-18:3.00:GR5:STD
6	710-04398	HEX BOLT
7	712-0324	NUT:HEXLK:1/4-20:GR8:NYLON
8	712-04063	FLANGED NUT 5/16-18:GRF:NYLON
9	716-0102	RING SNAP:1.00 DIA SHAFT
10	720-0269	GRIP:HNDL:CLU
11	720-0274	GRIP:1.0 ID x 5.0 LG
12	725-0157	CBL:TIE: 3/16 X .05 X 7.4
13	731-05095	BAILHOLDER LH
14	731-05096	BAIL HOLDER RH
15	736-0242	WASH:BLVL:.340 x .872 x .060
16	736-0463	WASH:FLAT: .250 x .630 x .052
17	738-1023	SHOULDER SCREW
18	746-04180	CLUTCH KABEL, FORW
19	786-0340	ADJUSTING LEVER
20	786-0341	786-0341
21	746-04191	THROTTLE CONTROL
22	710-0641	SCREW HHCS:1/4-20:2.25:GR5:STD
23	712-0324	NUT:HEXLK:1/4-20:GR8:NYLON
24	751B221535	CLAMP:CASING
25	710-0899A	SCR:#10-32:.62:HXSEMS:GR5.1
26	752B0367B1	ENGINE
27	786-04222	DRIVE HOUSING ASSY
28	710-1315	SCR:TT:3/8-16:1.250:HXINDWSH:S
29	710-0514	HHCS:3/8-16:1.00:GR5:STD
30	712-04065	NUT:FLGLK:3/8-16:GRF:NYLON
31	756-04145	PULLEY
32	754-04061	V-Belt
33	736-0105	SPRING WASHER .401 x.870 x.063
34	710-04453	SCREW
35	686-04054	FLAT IDLER BRACKET
36	710-04396	CARRIAGE BOLT
37	738-04139	BOLT
38	738-04131	SHOULDER SCREW
39	732-0418	SPR:EXTN:.38 OD X 2.10
40	712-04065	NUT:FLGLK:3/8-16:GRF:NYLON
41	756-04163	PULLEY-IDLER-FLAT
42	786-04256	TINE SHIELD MTD RED
43	734-1988	WHEEL COMP. 7X1.8
44	786-04232	WHEEL BRACKET FRONT
45	732-0384	SPRING EXTENSION
46	710-3130	SCREW HHCS:3/8-16:3.25:GR8:STD
47	750-04432	SPACER
48	749-04204	SHAFT-WHEEL AXLE 1"X20.46
49	712-04065	NUT:FLGLK:3/8-16:GRF:NYLON
50	710-0395	SCRE.HHCS:5/16-18:2.25:GR2:STD
51	712-04063	FLANGED NUT 5/16-18:GRF:NYLON
52	786-04238	BRACKET-TAILPIECE-RH
53	786-04239	BRACKET-TAILPIECE-LH
54	786-04257	SHAFT ASSY-WHL BRKT
55	710-3011	HHCS:3/8-16:2.25:GR5:STD
56	710-0520	HHCS:3/8-16:1.50:GR5:STD
57	750-04380	SPACER
58	711-0415	PIN:CLEVIS: .375 x 1.75
59	714-3020	PIN-COTTER
60	738-04125	SCR:SHLD:.374 DIA x 1.05 LG
61	712-0324	NUT:HEXLK:1/4-20:GR8:NYLON