Yard-Man YM 1618 SE 18ERT5H-643 (2006) Gearbox, Wheels, Cutting hight adjustment Spareparts

Name: WASH:BELL:.390 x 1.13 x.062
Price: 3.05 EUR

WASH:BELL:.390 x 1.13 x.062

Note: This article is 4 times installed in the device, the price is per piece!

Article Number:

736-0331

Pos:

Description:

".39x1.13 x.063"""

Modell Year:

YM 1618 SE / 2006 YM 1618 SE / 2007 E 45 R / 2006

DINNORM:

FINISH:MTD SPEC-100016

3.05 €

for EU Including VAT, plus shipping

Article added to Cart!

in Stock

Yard-Man Electric mower self propelled YM 1618 SE 18ERT5H-643 (2006) Gearbox, Wheels, Cutting hight adjustment

Pos	Article Number	Description
1	618-04364	TRANS ASM:T-DECK:SP
2	756-04221	PUL:3.03:TRANS:EURO
2A	712-0411	NUT:HEXLK:5/16-24 GR8:NYLON
3	715-0221	DOWEL PIN:H.G.PROD. 3/16 x 3/4
4	717-04184A	DRIVE PINION L.H.
5	717-04192A	DRIVE PINION R.H.
6	732-04262	SPRING:EXTN:.429 OD x 2.515
7	741-0710	BEARING-SLEEVE:.502x.627x1.00
8	748-04051A	SUPT:BRG:SP T-DECK
9	754-04003A	BELT:V-TYP:3L x 32.62
10	731-04756	CVR:WHL:DUST:T-DECK
11	687-02081	AXLE ASM:WHL
12	687-02110	BRKT ASM:PIVOT SP CENT HGT ADJ
13	710-04030	SCR:HL:1/4-20:.5:PANPHI
14	710-04203A	SCR:M6x1:12 MM:DIN 7500
15	710-04280A	SCR:M6x1:25mm:DIN 7500
16	712-04074	NUT:HEX:M10x1.25 DIN 980
17	710-04223	SCR:M6x1.0x10:PANTRXI
18	731-04592A	HNDL:HGT ADJ:"T"
19	731-04596A	BUT:HGT ADJ
21	710-0653	SCREW:TT:1/4-20:0.375:HXINDWSH
23	741-0708	BRG:FLG:HEX SPLIT .500 ID
24	750-04268	SPCR:CLIP:12.5mm ID x 13 LG
25	787-01155C	BRKT:ADJ:HT
26	787-01156B	BRKT:SPR:HGT ADJ
27	787-01157B	FINISH:PAINT
28	787-01161637	BRKT:HNDL:RH "T" REAR DIS RWD
29	787-01162637	BRKT:HNDL:LH "T" REAR DIS RWD
30	634-04249	WHL ASM:200mm:RWD ELP SLV
30A	634-04252	WHL ASM:200mm:RWD ELP SLV
31	734-04079	WHL:COMP:500x50 IDLE ELLIPSE
31A	734-04083	WHL:COMP:500x50 IDLE ELLIPSE
32	736-0504	WASH:WAVE:.510x.750 x.017
33	731-04750	HUBCP:WHL:T-DECK:OYSTER GRAY
33A	731-04618	HUBCP:WHL:"T" YARDMAN W/SPRIG
34	750-04305	SPACER:6.60mm ID x9mm OD x5.69
35	710-1733	HEX. SCREW M8x35 DIN 933-8.8
36	736-0702	WASH:FLAT:10.5IDX30OD:DIN 9021
37	736-0695B	WASH:FLAT:8.4x21x4 DIN 7349
38	712-0692	NUT:HEXLK:M8-1.25 NYLON DIN985
39	736-0331	WASH:BELL:.390 x 1.13 x.062
40	710-04280	SCR:M6x1:30mm:DIN 7500
41	750-04317	SPCR:CLIP:30MM ID x 6 MM LG
42	736-3013	WASHER-FL
43	736-04159	WASH:FLAT:.510 x 1.373 x.48
44	787-01348665	DECK:45cm:CENT HA
44A	787-01348638	DECK:45cm:CENT HA